In the construction of traditional houses with ceramic bricks and cement, the purpose of plastering is to smooth the walls. Towing is something that is only acquired with much practice. The task is simpler if the plaster is already prepared.

The main types of plaster

The conventional plaster made of light plaster is applied in two layers, a first application with a thickness of about 10 mm, in two layers, and finishing only with a coat of about 3 mm thick. If the surface you are working on is particularly absorbent, choose a first-coat version of high suction plaster. Also, special primer coatings are made for denser, less absorbent surfaces. You can also find finishing coat already made specially designed to apply in a thin layer on the plasterboard. You can now click here and come up with the best deals now.

How to apply the plaster

The application of the plasters can be done with a plasterer spoon. Using a trowel and spoon apply the plaster to the wall in small quantities. Make sweeping movements to spread the grout. Once the wall begins to dry, it can be smoothed by keeping the spoon at an angle.

For the repair plaster to blend well with the projected plaster that surrounds it, use a board and smooth the plaster with a reciprocating motion, stopping with the edges on the dry, plastered surface.

The finishing plaster is applied in the same way, but when dry it is polished with a flat spoon. Some finishing plasters are applied with the help of a brush. In this case you will need a plastic spatula to give it a final straightening.

Plaster already prepared

All professional plasters are difficult to apply. This type of plaster has a large package that is difficult to handle. They should be mixed with water and usually harden very easily. Care should be taken when applying it to the wall as it is prone to leaving streaks. It takes a lot of experience to achieve a smooth and even finish. Professional plastering should normally be applied in thin layers.

• To solve this problem there is the plaster already prepared. In the market there are two types of plaster for sale: the repair plaster and the finishing plaster. These two types of plaster are sold in small barrels or in powder to mix with water.
• Repair plaster can be used in thicknesses up to 50 mm and is easier to apply than conventional plaster. It can be used to fill deep holes and can serve as a base for the finishing plaster.
• Finishing plaster or slip plaster can be applied up to 3 mm thick. Provides a finish on the repair plaster, and is used for smoothing walls and for covering plasterboard.

Pladur boards

In a timber-framed house, the interior surfaces of the exterior walls will be made of plasterboard. The interior walls may be provided with a sliding layer of plaster to cover the joints between two plasterboard boards, or they may cover the joints and nail holes before painting or gluing wallpaper. Some walls that divide the interior of the house and some masonry constructions may have plasterboard mounted in wooden frames.

Use plaster

Most of the plaster used inside the houses is made of light plaster. On the other hand, cement based plaster known as stucco is generally used for exterior wall cladding finishes. They can eventually be used to restore something inside, for example when there are moisture problems.

Corners

To apply plaster to corners, you must first place a metal strip around the corner and then brush with plaster.